BIGTREETECH TMC2209 V1.2 Stepper Motor Driver Stepsticks UART Driver 256 2.8A Peak 3d Printer Parts suit SKR

BIGTREETECH TMC2209 V1.2 Stepper Motor Driver Stepsticks UART Driver 256 2.8A Peak 3d Printer Parts suit SKR
BIGTREETECH TMC2209 V1.2 Stepper Motor Driver Stepsticks UART Driver 256 2.8A Peak 3d Printer Parts suit SKRBIGTREETECH TMC2209 V1.2 Stepper Motor Driver Stepsticks UART Driver 256 2.8A Peak 3d Printer Parts suit SKRBIGTREETECH TMC2209 V1.2 Stepper Motor Driver Stepsticks UART Driver 256 2.8A Peak 3d Printer Parts suit SKRBIGTREETECH TMC2209 V1.2 Stepper Motor Driver Stepsticks UART Driver 256 2.8A Peak 3d Printer Parts suit SKRBIGTREETECH TMC2209 V1.2 Stepper Motor Driver Stepsticks UART Driver 256 2.8A Peak 3d Printer Parts suit SKR
รหัสสินค้า S62-007
หมวดหมู่ เครื่องพิมพ์ 3D Printer
ราคา 320.00 บาท
น้ำหนัก 200 กรัม
สถานะสินค้า Pre-Order
สภาพ สินค้าใหม่
ลงสินค้า 21 มิ.ย. 2562
อัพเดทล่าสุด 9 ก.ค. 2564
คงเหลือ 0 ชิ้น
ขออภัย สินค้าหมด
บัตรประชาชน
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
Latest BIGTREETECH TMC2209 V1.1 Stepper Motor Driver Stepsticks UART Driver 256 2.8A Peak 3d Printer Parts suit SKR
 
TMC2209 V1.1 VS TMC2208, more of these functions:
 
1. Blocking rotation detection
Stallguard--TMC2209 provides a load and loss of speed detection technology
 
2. Current dynamic adjustment
Coolstep--TMC2209 provides a current dynamic regulation technology that saves up to 75% of electrical energy.
 
Features:
Stepper Motor Driver based on a Trinamic TMC2209
 
- Hardware compatible with StepStick and Pololu A4988
- Step/Dir interface with microstep interpolation (up to 256 microsteps)
- Drive capability up to 2.0A (RMS) continuous coil current - 2.8A Peak
- Configuration via CFG pins or UART interface
- Motor voltage: 5.5...28V
- Logic voltage: 3.3...5V
- RSense: 0.11 Ohm
- stealthChop2 - for quiet operation and smooth motion
- spreadCycle - highly dynamic motor control chopper
- coolStep - current control for energy savings
- stallGuard4 - sensorless motor load detection
 
The hardware of the three modes of UART/DIR/STEP is the same. If you need to use UART mode, just need to modify the firmware.
 
BIGTREETECH TMC2209 V1.1 UART firmware :

วิธีการชำระเงิน

สินค้าที่มี สถานะพร้อมส่ง ลูกค้าสามารถขำระเงินได้เลยโดยไม่ต้องรออีเมล์หรือ SMS จากร้านค้า

ลูกค้าสามารถชำระเงินได้ด้วยวิธีการดังนี้

  • ชำระเงินผ่านทางธนาคาร ตามรายชื่อข้างล่าง
  • ชำระเงินผ่านบัญชี พร้อมเพย์ หมายเลขโทรศัพท์ 0891307465

หลังจากโอนแล้วให้ลูกค้าแจ้งการชำระเงินโดยทางใดทางหนึ่ง

  • แจ้งชำระเงินผ่านระบบ แล้วกรอกรายละเอียดให้ครบถ้วน พร้อมแนบหลักฐานการโอนเงิน และระบุเลขที่ใบสั่งซื้อให้ถูกต้อง
  • หรือโทร หรือส่ง SMS แจ้งการชำระเงินที่เบอร์ 089 130 7465
  • หรือส่งเมล์มาที่ technoshopthai@gmail.com โดยต้องแนบรายละเอียดการโอนเงินมาด้วย

ทางร้านจะจัดส่งสินค้าและส่ง Tracking number ให้ลูกค้าทาง Email หลังจากได้จัดส่งสินค้าแล้ว

ขอบพระคุณลูกค้าทุกท่าน ที่อุดหนุนสินค้ากับทางร้าน

ขอสงวนสิทธิ์ในการยกเลิกการสั่งซื้อ กรณีลูกค้าไม่ชำระเงินภายใน 2 วัน นับจากทำรายการสั่งซื้อ

ธนาคารไทยพาณิชย์ จำกัด (มหาชน) สาขาถนนศรีนครินทร์ (ซีคอนสแควร์) ออมทรัพย์
พร้อมเพย์ สาขา- -
Scan this!
ณัฐวุฒิ ชูปัญญา
089-xxxxxx-5
Accept All Banks | รับเงินได้จากทุกธนาคาร

MEMBER ZONE

TRACK YOUR ITEM

*ใส่ เบอร์มือถือ หรือ email ที่ใช้ในการสั่งซื้อ

OVERVIEW

หน้าที่เข้าชม90,414 ครั้ง
ผู้ชมทั้งหมด55,209 ครั้ง
เปิดร้าน22 ก.ค. 2557
ร้านค้าอัพเดท5 ก.ย. 2568

CONTACT US

089 130 7465
พูดคุย-สอบถาม